Multi-sample Freezing Grinder
Multi-sample Freezing Grinder NB-96C
Features
The multi-sample freezing grinder developed by our company can quickly reach low temperature, ensuring that the sample is in a low temperature environment during the entire grinding process, which can greatly ensure the stability of the sample
Fast cooling: Imported compressor, reaching below 0°C in 1 minute; reaching -10°C in 5 minutes
Unlocking method: automatic lifting, one key switch
Display mode: 7-inch embedded LCD touch screen, easy to operate, beautiful and generous
Anti-vibration principle: 4 independent linkage mechanical shock absorbers
Grinding method: dry grinding, wet grinding, liquid nitrogen freezing
Display mode | touch LCD screen |
Working mode | up and down vibration, three-dimensional movement mode grinding |
*Processing sample volume | 24-96*2ml; 16*(5-15ml) samples, 1-96 samples can be freely selected; |
Homogenizing speed | 10-70 HZ/sec |
*Shockproof principle | 4 independent linkage mechanical shock absorbers |
Adapter material | Teflon |
Grinding method | wet grinding, dry grinding and low temperature grinding are all available |
Maximum feed size | no requirement, adjust according to adapter |
Final output particle size | ~5μm |
Number of grinding platforms (acceptable number of grinding tanks) | > 2 |
Fastening device with automatic center positioning Yes | Grinding kit material Hard rigid, PTFE (Teflon) |
Safety lock during work, full protection | |
Power supply | Two-phase 220V/50HZ |
Working time | 0 seconds -99 minutes, users can set by themselves; |
Diameter of grinding ball | 0.1-30mm |
Grinding ball materials | alloy steel, chromium steel, zirconia, tungsten carbide, quartz sand; |
Acceleration | Reach the maximum speed within 2 seconds |
Deceleration | Reach the lowest speed within 2 seconds |
Noise level | <50db |
Write your message here and send it to us