Tabletop planetary ball mill
Vertical planetary ball mill is a necessary device of high-tech materials mixing, fine grinding, sample making, new product development and small batch production. Tencan planetary ball mill owns small volume, high efficiency, low noise and functional features which is a ideal equipment for R&D institution, university, enterprises laboratory to get samples (each experiment can get four samples at the same time). It gets powder samples under the vacuum state when equipped with vacuum ball mill tank.
Planetary Ball Mill has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Various kinds of different materials can be ground by the mill with dry or wet method. Minimum granularity of ground powder can be as small as 0.1μm.
1.Stable revolving speed of the gear transmission ensures the consistency and repeatability of the experiment.
2. Planetary movement principle is adopted in the machine, which has high speed, large energy, high efficiency, small Granularity.
3. Four powder samples from different sizes and different materials can be produced at one time.
4. The machine is controlled by frequency converter, you may choose ideal rotating speed according to expected experimental result. The converter is equipped with device of under voltage and over-current to protect the motor.
5. The planetary ball mill has functions of timing power off, self-timing forward and reversal rotating. You may choose freely any operation modes of one-way direction, alternation, succession, time setting according to experimental needs, so as to improve efficiency of grinding.
6. Technical features of Tencan Ball Mill: Low center of gravity, stable performance, compact structure, easy operation, reliable safety, lower noise, small loss.
7. Safety switch is installed on the machine to prevent safety accident if the safety cover is opened while machine is running
Material: Active Carbon
Material weight: 50g
Mill jar & balls: Corundum mill jars and zirconia balls
Rotation speed: 560rpm
Applied equipment: Planetary ball mill,model : NQNSXQM-0.4
Total volume: 100ml*4 = 400ml
Grinding time: 2hours
Granularity: 2μm
Material: Kaolin
Material weight: 500g
Grinding jar material: PTFE
Grinding method: Dry grinding
Rotation speed: 450rpm
Total volume: 1L*4=4L
Grinding time: 1hour and 20minutes
Feed size: 2mm
Granularity of output: 100nm
Material: Green tea(Dry)
Material weight: 0.25kg
Material of mill jar: stainless stell
Grinding method: dry grinding
Applied machine: Planetary ball mill,model : NSXQM-2
Total volume: 0.5L*4=2L
Take time:1hour
| Drive Mode | Gear drive |
| Operation Mode | Two or four grinding tanks working together |
| Max Load Capacity | Less than 2/3 of total volume of grinding jars |
| Feed Size of Materials | ≤3mm |
| Output Granule | Minimum 0.1µm |
| Rotational Speed Ratio | 1/2 |
| Max.Continuous Operating Time | 72 Hours |
| Materials of Jar | stainless steel.agate,nylon,corundum, zirconia,etc |
|
Technical Parameter Table(I) of Vertical Planetary Ball Mill (Square Type) |
||||
|
Type NO |
Specification |
Volume of Each Matched Pot |
Quantity |
Remarks |
|
NXQM-2 |
2L |
50-500ml |
4pcs |
Matched with vacuum mill pots from 50ml to 250ml |
|
NXQM-4 |
4L |
250-1000ml |
4pcs |
Matched with vacuum mill pots from 50ml to 1000ml |
|
NXQM-6 |
6L |
1-1.5L |
4pcs |
Matched with vacuum mill pots from 50ml to 1000ml |
|
NXQM-8 |
8L |
1-2L |
4pcs |
Matched with vacuum mill pots from 50ml to 1500ml |
|
NXQM-10 |
10L |
1-2.5L |
4pcs |
Matched with vacuum mill pots from 1L to 2L |
|
NXQM-12 |
12L |
1-3L |
4pcs |
Matched with vacuum mill pots from 1L to 2L |
|
Technical Parameter Table(II) of Vertical Planetary Ball Mill (Square Type) |
|||||||
|
Model |
Power |
Voltage |
Revolution |
Rotation |
Total |
Alternating Run Time |
Noise≤db |
|
NXQM-2 |
0.75 |
220V-50Hz |
35-335 |
70-670 |
1-9999 |
1-999 |
60db |
|
NXQM-4 |
0.75 |
220V-50Hz |
35-335 |
70-670 |
1-9999 |
1-999 |
60db |
|
NXQM-6 |
0.75 |
220V-50Hz |
35-335 |
70-670 |
1-9999 |
1-999 |
60db |
|
NXQM-8 |
1.5 |
220V-50Hz |
35-290 |
70-580 |
1-9999 |
1-999 |
60db |
|
NXQM-10 |
1.5 |
220V-50Hz |
35-290 |
70-580 |
1-9999 |
1-999 |
60db |
|
NXQM-12 |
1.5 |
220V-50Hz |
35-290 |
70-580 |
1-9999 |
1-999 |
65db |
|
Technical Parameter Table(III) of Vertical Planetary Ball Mill (Square Type) |
||||
|
Model |
Power |
Speed Control Mode |
Net Weight (kg) |
Dimension (mm) |
|
NXQM-2 |
0.75 |
Frequency Control |
93 |
750*470*564 |
|
NXQM-4 |
0.75 |
Frequency Control |
93 |
750*470*564 |
|
NXQM-6 |
0.75 |
Frequency Control |
93 |
750*470*564 |
|
NXQM-8 |
1.5 |
Frequency Control |
150 |
900*600*640 |
|
NXQM-10 |
1.5 |
Frequency Control |
150 |
900*600*640 |
|
NXQM-12 |
1.5 |
Frequency Control |
150 |
900*600*640 |
Besides the planetary ball mill machine, our factory provides all kinds of mill pots，like stainless steel mill pot, zirconia mill pot, alumina mill pot, nylon mill pot, PU mill pot, tungsten mill pot, hard metal mill pot and tempered nylon mill pot etc. Further, we also provide stainless steel mill balls, zirconia mill balls, alumina mill balls, PU mill balls, steel carbon mill balls,tungsten mill balls, etc.
|
Stainless steel
|
Agate
|
Alumina
|
Nylon
|
Zirconica
PU
PTFE
Tungsten
