Vertical Semi-circle Planetary Ball Mill
Grinding jar and ball
We provide all kinds of mill pots in any matched size, which are made from following materials of agate, Alumina corundum ceramics, zirconia ceramics, silicon nitride ceramics, carborundum ceramics, stainless steel, high wear resistant steel, manganese steel, nylon, PU, cemented carbide, crystal glass, and etc.
Vertical Laboratory Planetary Ball Mill (Semi-circle Model)
Planetary Ball Mill has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Various kinds of different materials can be ground by the mill with dry or wet method. Minimum granularity of ground powder can be as small as 0.1μm.
Feature:
- Stable revolving speed of the gear transmission ensures the consistency and repeatability of the experiment.
- 2. Planetary movement principle is adopted in the machine, which has high speed, large energy, high efficiency, small Granularity.
- 3. Four powder samples from different sizes and different materials can be produced at one time.
- 4. The machine is controlled by frequency converter, you may choose ideal rotating speed according to expected experimental result. The converter is equipped with device of under voltage and over-current to protect the motor.
- 5. The planetary ball mill has functions of timing power off, self-timing forward and reversal rotating. You may choose freely any operation modes of one-way direction, alternation, succession, time setting according to experimental needs, so as to improve efficiency of grinding.
- 6. Technical features of Tencan Ball Mill: Low center of gravity, stable performance, compact structure, easy operation, reliable safety, lower noise, small loss.
- 7. Safety switch is installed on the machine to prevent safety accident if the safety cover is opened while machine is running.
Application Cases of Planetary Ball Mill:
Drive Mode | Gear drive or belt drive |
Operation Mode | Two or four grinding tanks working together |
Max Load Capacity | Less than 2/3 of total volume of grinding jars |
Feed Size of Materials | ≤3mm |
Output Granule | Minimum 0.1µm |
Rotational Speed Ratio | 1/2 |
Max.Continuous Operating Time | 72 Hours |
Materials of Jar | stainless steel.agate,nylon,corundum, zirconia,etc |
Technical Parameter Table(I) of Vertical Laboratory Planetary Ball Mill(Semi-circle Round Type) |
||||
Type NO |
Specification |
Volume of Each Matched Pot |
Quantity |
Remarks |
NXQM-2A |
2L |
50-500ml |
4pcs |
Matched with vacuum mill pots from 50ml to 250ml |
NXQM-4A |
4L |
250-1000ml |
4pcs |
Matched with vacuum mill pots from 50ml to 1000ml |
NXQM-8A |
8L |
1-2L |
4pcs |
Matched with vacuum mill pots from 50ml to 1500ml |
NXQM-10A |
10L |
1-2.5L |
4pcs |
Matched with vacuum mill pots from 1L to 2L |
NXQM-12A |
12L |
1-3L |
4pcs |
Matched with vacuum mill pots from 1L to 2L |
NXQM-16A |
16L |
2-4L |
4pcs |
Matched with vacuum mill pots from 1L to 3L |